For use with the Catch Wall Holders (both 45 and 90 degree holders) made in attractive galvanised steel.

Specification

• Galvanised steel bar and plate
• Allowing centres not less than 305mm with the R90 & 380mm with the R45
• When used with R45, it is necessary to indicate whether left hand or right hand skew is required
• 2.4kg per ramp

Installation

In conjunction with R90 holders - the Model R should be bolted to the wall 418mm to the lower bolt hole above ground level, and the BC ramp should be bolted approx 240mm above ground level, ensuring the top part of the ramp is horizontal. Ensure than the lower bolt is secured into a suitable concrete surface or similar. Same level parking - holders should not be less than 610mm centres apart. Up/Down parking - holders should not be less than 305mm centres apart.

Delivery time: Typcially 5 - 7 days