We all want the same thing at the end of a long bike ride, whether a lycra-clad machine or a humble commuter: to neatly tuck our bike away without fear of it being taken or blocking the way in the entry hall. However, not everyone has the luxury of having plenty of space…
You don’t want to leave it outside; we’ve all seen the sad-looking frames tethered to a lamppost after being slaughtered for the front wheel and seat. Furthermore, weather exposure might cause the mechanics to corrode.
Will it actually fit inside?
Various innovative bike storage options are available, but you must choose what is best for you and your setup. It must be safe, practical, and simple to use. Here is our best bike storage alternative for renters and homeowners alike.
The BDS Two-Tier Bike Rack
Without a doubt, the BDS Two Tier Bike Rack is the most space-efficient bicycle parking rack on the market. Why should you rely on a two-tiered bike rack from Bike Dock Solutions?
Due to its two floors and staggering heights, you can fit a large number of bikes in a small area. Storage requires only 375mm of space between the bikes. Due to the varying heights, you can space the bikes closer together than on other types of racks. This is very useful in cramped spaces.
Top BDS Tip: All you need is a room with a minimum height of 2.4m.
What are the possible areas for the BDS Two-Tier bike rack?
The BDS Two Tier Bike Rack is suitable for flat, hard surfaces such as concrete or asphalt. As previously said, head height is crucial, but you will also want some entrance room. We recommend a depth of at least 3.5m. This bike rack also has a hot-dipped galvanised covering that will protect it against rust for many years.
The BDS Two-Tier Bike Rack is an excellent method to keep your bike secure.
The front and rear wheels and the centre frame lock at three locations on the BDS Two Tier Bike Rack. You can fit a locking bar in the centre of the bike rack, allowing cyclists to use their D lock there.
We make this bike rack to order, so we can create a frame to accommodate whatever size you require. This must be in two-bike increments because each section holds one bike above and one below. They are on the upper and lower levels, respectively. The frames can join together to take up less space, making it a truly customisable alternative.
You can check the rack’s specifications and order it on our website.